LED lights of the ten major advantages:

First, the lamp body is very small
   LED lights are very small, very fine LED chip package in the transparent epoxy inside, so it is very small, very light, in the production and application can save a lot of material and space.

Second, the energy consumption is very low
   LED lamp operating voltage is generally only 2 ~ 3.6V, operating current as long as 0.02 ~ 0.03A. That is: it consumes no more than 0.1W of electricity, the consumption of electricity than the same luminous incandescent lamp to reduce more than 90% Lamps are reduced by more than 70%.

LED


Third, sturdy and durable
  LED chips are completely encapsulated in the epoxy resin inside. Small epoxy resin particles extremely difficult to break, the entire lamp body is not loose part; inside the chip is extremely difficult to break, but also little heat effect and may volatilize, fuse. These features make LED difficult to damage.

Fourth, LED lamp long life
  In the appropriate current and voltage, LED lamp life of up to 100,000 hours,

Fifth, safe low voltage
  LED lights using low-voltage DC power supply (AC current rectifier can be DC), the supply voltage between 6 ~ 24V, due to different products vary. In short, it uses a more secure DC power supply than high-voltage power supplies, especially for home and public places.

Sixth, the scope of application is wide
  Due to the small size of each unit LED chip is 3 ~ 5mm square or round, it is more suitable for the preparation of complex modeling process devices. Such as the manufacture of soft, flexible lamp, light belt, shaped lights, the current only LED suitable.

COB LED Spotlight


Seventh, richer colors
  LED is a digital control, light chip can now send a variety of colors, including red, green and blue ternary, it is with this ternary color, through the system control, you can restore the colorful world of colorful.

Eighth, less heat dissipation
  LED is a more advanced cold light source, it is not like incandescent, fluorescent light as a lot of infrared 
and ultraviolet radiation, especially for cultural relics, jewelry, high-end cosmetics and other valuables lighting. Almost no incandescent lamp that the current thermal effect, will not be affected by the thermal expansion and contraction of the bubble. Will not make the bulb yellow, will not make the lamp accelerated aging, will not constitute a greenhouse effect on the surrounding environment.

Ninth, less environmental pollution
LED for the protection of the environment mainly in three aspects:
1, no metal mercury hazards. LED lights which do not like the use of fluorescent lamps as high-risk mercury, there will not be bulb manufacturing process or damage may leak mercury ions, phosphor and other public hazards.

2, the manufacture of LED epoxy resin is an organic polymer compounds, curing has a good physical and chemical properties, the wafer, metal bonding strength, hard and flexible, the majority of the solvent and the stability of the solvent is not easy to damage, Even after the damage or aging can also be recycled, will not cause pollution to the environment.

spot light


3, LED lamps and display the layout of the particles, the resulting light is generally scattered, rarely produce light pollution.

Tenth, more cost savings
Compared to incandescent, fluorescent lamps, LED lamps, the purchase price is higher. However, due to the LED energy consumption is particularly low, in the long term can save a lot of electricity, you can save the input of the lamp, so the cost of comprehensive use more cost-effective.

Copyright @ 2017 Yunsun LED Lighting Co., Ltd .

Technical Support : baiila       Stiemap

Top